I'm looking for some suggestions/help on selecting a fin for my next board. I'm making a stubby single fin 6'2"x22x 2 3/4, rounded pin tail. It will be a hair under 22 wide since I slipped with the saw at exactly the wrong spot when I was cutting out the blank. The tail a foot up is 15". I will use the larger box and put it about 6" from the tail.
I'm leaning towards a 6.5" cutaway fin. I like the Smith/Parrish cutaway from True Ames, but I am looking for suggestions on size and/or any other fins out there. Thanks.
On another topic this is my first EPS board to shape. I did a lot of reading and I was a little retisent about it. But so far I have enjoyed it. I had to take the cover off my planer to keep the beads from melting on the belt, but I like the way it shapes with the surform. I'll I've done so far is cut it out and get the thickness right, so I have a ways to go. Thanks for any help.