Ok, so I just got done doing a 7' egg. Got a round pin tail and is about 20.75" wide and 2.75" thick with a spiral V rolled into a rolled bottom. I'm not sure on what to do in terms of in set up though, I'd prefer to ride the board mostly singlefin, however on biger days I'd like the option to go 3 fin set up, or 2+1 I guess you could say. I want to stay away from FCS because I'm doing a resin tint and the plug will show through, but am I setting myself up for dissapointment here? I was looking at the finsunlimited and futures sites and came across some that might work, the FU site had the k2d2 but I thought all fins should be the same size, which would be hard as the talest Futures I found is 4.6 or there abouts. Ok, after that ramble I confused myself. Basically, if I'm looking to do a 2+1, what fins should I be looking at here.