Greetings, long time lurker here, ready to build my next board.
Looking to shape a bonzer and am hoping to get some blank recomendations to achieve the right rocker/foil.
I am thinking something 7’8-7’10.
I was gifted a set of 3 fin bonzer runners that are 10"x3"
For runner placement I am thinking 11.5"ish up from the tail, 1.5" from rail with a 3/16 toe in, am i on the right track?
open to all suggestions and am hoping someone can offer some insight. Thanks in advance.
Millennium 7’9P or 7’9PT and Arctic 7’8E. The Natural rocker in a Arctic 7’8E is probably good enough for a classic Bonzer.
Thanks for the reply McDing,
My blank supplier only sells stock US blanks so im looking at the 7’10sp and 8’4sp (unless theres a better option?) blanks in their catalogue.
I have always used blanks about 6 inches longer to drop my rocker.
Where should my rocker numbers be at the tip and tail when its finished? Not sure if this needs to be adjusted due to the bonzer setup.