The Swaylock's underground shape off is happening right now. You have from now until the end of Sept to shape and glass a surfboard. There is no prize for the winner....the results are going to be mind blowing. Show up at Big Sur with your entry. No mags, no hype.....My entry has fins made by ProBoxLarry.........Stoke happens!
In the words of Bob Dylan; " Don't critisize what you can't understand." I was there on Saturday and saw Calvani and Christenson at work on a Skil not a keyboard. Reverbs remarks are completly ridiculous. Ignorant even. If you don't know what you are speaking of; Keep your flippin mouth shut. I watched Calvani thru the whole 1 1/2 hour. I wanted to see if he could do it or not. He did well. Christenson drank a beer stepped inside the bay and started making full depth passes, tail to nose until he had eliminated an inch or two and was at thickness. Solid, clean, full passes. No marketing for these two guys. They are the real deal. If reverb could market himself as well as he can bullshit,; I'm sure he would be a big hit with all the Surf Mags. But before he could do that; we'd have to know who he is and where he is from. I'm sure reverb would've been whittling away until way after dark and everyone had gone home if he were in the "Shape-off" Larry --You're a nice diplomatic guy. I'm not. Peace. Lowel
like
0
That which can be assorted without evidence was read in an illegal magazine.
Too bad you can't write or speak english a little better. Then maybe we could understand what you are trying to communicate the othhe 10% of the time. Go get 'em Verbal Kent.
like
0
That which can be assorted without evidence was read in an illegal magazine.
I don't claim to be the worlds greatest critic like yourself. But I have posted pics before. Where were you?? Easier for me to post pics on Facebook. Lowel --Oregon Shapers-- Little Hawaii Surf Designs. You would benefit from a visit to the "Fish bowl". OR Go home ashamed like a couple of shapers did at the show. I'm not as fat headed as you. I don't attempt to shape every thing that's in or out of vogue. I stick to what I know and have shaped over the years. I don't even do "Fish". 1. I don't think they surf worth a shit and 2. I don't care to waste time on butt cracks on something that I have NO confidence in. The boardroom Show honors Shapers who have stood out, set trends and contributed to design and the "Industry" over the years. It honors those shapers and gives lesser knowns an opportunity to make a name for them selves. You could do the same. Tell us your name and where you're from and I'll call Scott Bass and beg him to invite you or honor you at the next show. Ha! Lowel and PS Talked to Ben as well. Not a CNC'ed blank. I'm sure he'd like to know who the fluke you are as well.
like
0
That which can be assorted without evidence was read in an illegal magazine.
I don't even do "Fish". 1. I don't think they surf worth a shit and 2. I don't care to waste time on butt cracks on something that I have NO confidence in.
dingy.......... maybe it's because you're not doing it correctly.................lol.
Ha! I have no desire to do them. I turned down orders for them this past year. Not interested in them. I always tell guys ; If you want one of those dogs call Herb Spitzer. Lowel
like
0
That which can be assorted without evidence was read in an illegal magazine.
Ha! I have no desire to do them. I turned down orders for them this past year. Not interested in them. I always tell guys ; If you want one of those dogs call Herb Spitzer. Lowel
lowel,
be glad to do them...........that way they get one that works.
i'll pass on to brom what you said,,,he'll get a good laugh out of it !
The whole concept is goofball; nonetheless it serves a purpose, to keep the hype going. Anyhow congradulations to everyone, you all get a prize.
What happens to all of the shaped blanks?
http://mushycloseouts.wordpress.com/
The Swaylock's underground shape off is happening right now. You have from now until the end of Sept to shape and glass a surfboard. There is no prize for the winner....the results are going to be mind blowing. Show up at Big Sur with your entry. No mags, no hype.....My entry has fins made by ProBoxLarry.........Stoke happens!
Stingray
http://www.swaylocks.com/forums/big-sur-board-swap
In the words of Bob Dylan; " Don't critisize what you can't understand." I was there on Saturday and saw Calvani and Christenson at work on a Skil not a keyboard. Reverbs remarks are completly ridiculous. Ignorant even. If you don't know what you are speaking of; Keep your flippin mouth shut. I watched Calvani thru the whole 1 1/2 hour. I wanted to see if he could do it or not. He did well. Christenson drank a beer stepped inside the bay and started making full depth passes, tail to nose until he had eliminated an inch or two and was at thickness. Solid, clean, full passes. No marketing for these two guys. They are the real deal. If reverb could market himself as well as he can bullshit,; I'm sure he would be a big hit with all the Surf Mags. But before he could do that; we'd have to know who he is and where he is from. I'm sure reverb would've been whittling away until way after dark and everyone had gone home if he were in the "Shape-off" Larry --You're a nice diplomatic guy. I'm not. Peace. Lowel
That which can be assorted without evidence was read in an illegal magazine.
...moron, still in the same game? also who are you where s your work? we never see anything from you repair man.
-about christenson and Calvani what I say with marketing, is that 90% of their work is done by machine and crew and the guys sell other image.
-Yes, I think I cannot make a special shape in 1 1/2 hour; may be half an hour more.
Too bad you can't write or speak english a little better. Then maybe we could understand what you are trying to communicate the othhe 10% of the time. Go get 'em Verbal Kent.
That which can be assorted without evidence was read in an illegal magazine.
I don't claim to be the worlds greatest critic like yourself. But I have posted pics before. Where were you?? Easier for me to post pics on Facebook. Lowel --Oregon Shapers-- Little Hawaii Surf Designs. You would benefit from a visit to the "Fish bowl". OR Go home ashamed like a couple of shapers did at the show. I'm not as fat headed as you. I don't attempt to shape every thing that's in or out of vogue. I stick to what I know and have shaped over the years. I don't even do "Fish". 1. I don't think they surf worth a shit and 2. I don't care to waste time on butt cracks on something that I have NO confidence in. The boardroom Show honors Shapers who have stood out, set trends and contributed to design and the "Industry" over the years. It honors those shapers and gives lesser knowns an opportunity to make a name for them selves. You could do the same. Tell us your name and where you're from and I'll call Scott Bass and beg him to invite you or honor you at the next show. Ha! Lowel and PS Talked to Ben as well. Not a CNC'ed blank. I'm sure he'd like to know who the fluke you are as well.
That which can be assorted without evidence was read in an illegal magazine.
herb
Ha! I have no desire to do them. I turned down orders for them this past year. Not interested in them. I always tell guys ; If you want one of those dogs call Herb Spitzer. Lowel
That which can be assorted without evidence was read in an illegal magazine.
be glad to do them...........that way they get one that works.
i'll pass on to brom what you said,,,he'll get a good laugh out of it !
herb
Pages