Your secret will be safe, don't worry. I'll check back in a few days when the tail width, length, rocker, and overall design have all changed again.
i might. But at least I can do it. Your too busy buying customs I've noticed. Do you still shape? Or did you call it quits bcuz their boards worked better than yours? Want to know why their sh*t works? It's bcuz they - like me didn't quit, they had the balls to attempt doing what they didn't know....they weren't afraid to risk failure. Put me in that group.
Yes, I buy boards. Unlike yourself, I realised my skills were all over the place, and I wasn't a shapers arsehole.
Merry Christmas shapa, hope it turns out alright.
A lot of fun.
Update: foiling deck tommorow, sanding out any high spots that x marked, and maybe cutting in concaves. Keep posted.
About the Skil100:
It is easy to handle w shorter bed. Only takes a bit of a turn at a 45 to cut through flip area, but the otf cutting action takes t out time. I set it low and slow. Comin along.
I got to planing on my deck at the rear to remove sum thickness... had a few high spots i marked with a x with pencil... gonna sand those out. Then i should prob start my concaves.
Well, i got my rocker close enough so far! But ill take another 1/16" under the nose w spoke shave plus block.
The tail rocker is ok at 2" i geuss i got carried away w planer. ........hope it works out!? This board is whatever was in my head kinda thing. It has a short board influence; fish, partial sims outline on rear half. Nose rocker is roughly 3", but will be just a tad more.note: i haven't foiled deck out near the tips as the mgr is work n outdoors today. I don't have a garage so I'm shaping outside. Anyway, the plan is to thin out the foil, and then work on bottom contours; concaves etc... I'm pretty happy i turned it around - being i miscalculated the dims earlier. Purdy stoked!:))
I'm sorry about upside down pics as i discovered i took em w phone upside down. .. dunno if i can resize pics on my android ?
Stayrelaxed- that sounds good! I was just watching a vid about the speeddialer fyi. Id like to know about that fin set up. Another fin set up i am thinking about is a tri fin, or a 2+1 w long box.I think the quad might be best like you say!ill figure it out .anyhow, i have to finish my screwdriver. Night.
"Freestyle."
"Freestyle."
"Freestyle."
Any updates / photos?
Happy holidays
Scrub it kook
20141227_131424.jpg
20141227_131400.jpg
20141227_131233.jpg
20141227_131506.jpg
"Freestyle."
All its missing is a deep swallow cut & that'd be a sweet fish. Tail seems real pulled in for a simmons. Prob rip with some speed dialer quad fin.
"Freestyle."
Pages