I shaped a 5'6 fish and I am really happy how the shape turned out. Now I tried to glass the board the other day after watching endless hours of glassing videos. I wanted to do a slightly tinted glassing (I'm using epoxy). So I taped off the deck to do cut laps, mixed my epoxy and poured it onto the fibreglass (4oz with 6oz fin patch). It worked kind of well except for the color which didn't show as even as I hoped for. Anyway when I started to lap the rails I noticed I did way too many release cuts or just cut away too much of the cloth so that I had a lot of the foam not covered by cloth at the nose and the tail. I got really upset because it looked that shitty and decided in a split second to rip off the fibreglass again. I wiped off as much of the epoxy as I could but I now still have a blank which is already covered by a thin layer of epoxy. Do I sand it down and have a completely new try? Or do I glass over the epoxy?
Thankful for any help or opinion!