I like it. I had been thinking of doing something similar with Carbon Tow.
So now, the board is lined.
The bottom countour is single to double to Vee. I've got an old Channel Islands MBM. I copied the bottom from that, but gave it a bit less rocker through the middle. I used a smaller level to measure the flatness of the concave.
First color, and all tied up
Second color, and into a microwave safe bowl. The bowl was a smart $7.00 at Smart and Final. Wife would kill me if I used her good glassware.
Microwave at 50% for 10 minutes to set the acid dye.
Better pictures than earlier in the thread. My phone isn't swaylocks friendly.
Hanging to dry. One for the top, and one for the bottom
Please keep posting, great stuff. Has anybody ever tie dyed the actual glass cloth itself? I'm guessing it wouldn't work.
Send me your dinged, damaged, and yellowed.
The bottom was vacuum bagged, along with a 4 oz warp
Assuming you're using epoxy resin, I think 4 oz is a good call for the bottom. The tie dyed fabric with epoxy likely adds a bit of strength to the schedule. Love the build threads especially something a bit different!