Please chime in.
Anything goes... I'll do all the work (at home) after hours.
Hand shape.
Teck/Crazy/Weird ideas welcome.
And you can decide the final build
...But don't through me under the bus
ideas?
Swaylock's
I'm 72kg
futures fins or fcs1 or fcs2, or glasson. custom fins keels etc.
anything goes.
Glassed in epoxy over pu blank.
Math's, ark's (maybe bagging welcome)
...................No rush, but maybe keen to give it a run.
Cheers.
for the tech, there are a lot of things to try, I would go with exposed cork with cork pad just to try to stay on the green side(i know PU and epoxy are not green and even fiberglass), no more wax or eva, for the shape actually I'm only looking at asymmetric, different fins obviously toe and heel side channels and so on. After my latest build that was basically a el tomo copy with double foiled fins no cant no toe parallel channels-concaves, I would like to go for an asymmetric with bullet nose with 2 fins on the heel side like a quad but no cant and no toe, 1 on the toe side all of them hatchet style, parallel channels on the hell side 1 on the toe side, plus 2 channels in the central bottom like I did on one of my latest build for small waves but I used in Indonesia in 6 foot surprising me a lot.
Ta.
No CORK ! (not a fan at all) :).
Asymmetric.....................I'm open to that.
"If it wasn't for the ocean, I wouldn't be here"
Are we limited to this 6'4" blank, or...?
I guess not, I have a 9'3" High Performance Mal Blank here at home too... Thing is.
The 6'4 is a $50 reject the 9'3 is double that...
Home project I'm not going to order in any blank from work.
"If it wasn't for the ocean, I wouldn't be here"
Make a 9'2" bonzer gun. Red with flames.
Don't think i'd use it much... 9'3" Hang it on the wall maybe
bonzer_step_up_surfboard.jpg
"If it wasn't for the ocean, I wouldn't be here"
Asymetric twin keel fish???
Yeah, I like the sound of that.
Ta
"If it wasn't for the ocean, I wouldn't be here"
The blank has way too much rocker for any type of fish or groveller. You could do a channel bottom 2+1 or Widowmaker; put the wide point a couple inches forward of center. Toe the channels with the same toe-in as the sides.
maybe... I would be thinking 5'3ish for a fish... bit of wiggle room there???
...............2.1 spiral vee could be fun
"If it wasn't for the ocean, I wouldn't be here"
Pages