I've been trolling through the archives and learning a ton before I shape my first board. There is one question I can't find the question to. From my experience with fiberglass as a boatbuilder years ago, glass doesn't like to wrap around sharp corners without creating an air pocket. I imagine that the foam needs to be rounded a bit in the tail section and then the sharp edge reformed with a resin dam on the hotcoat. My question is how round do I need to make this edge without creating too much work for myself. I'll be starting two boards, a mini-simmons and a classic fish. Wrapping the tail of the fish actually is giving me a bit of a mental challenge as to the best way to go about it as far as the buttcrack and pin tips.
any suggestions are greatly appreciated