Just in case anyone missed the last post in the router jig thread or has trouble finding it someday, I wanted to start a dedicated thread to sharing this helpful file for all of you out there set on making a DIY-Jig for your fusion boxes. After painstakingly searching on sways and the rest of the web for some kind of printable template to allow me to easily cut out my own jig, I decided to just make my own. Thanks to a little graphic design know-how and some helpful measurments from the afformentioned jig thread, I was able to mock up this file in illustrator by using a reference photo of the jig re-sized to actual size to get the hourglass portion. I'm in the process of making my own jig now and taking photos along the way - I'll post the step-by-step on how to make your jig in the morning. In the meantime, here's the file to get you started. As long as your pinter is set up correctly, it should print at the exaxt size of the jig.