3 posts |
Last post
ShaneT's picture
Joined: 11/12/2020
Will a repair show on a clear epoxy board

Hey guys so I'm flossing my first clear board I have done many colered before but never clear.

I have already laminated the bottom with 6oz and the top 6+4oz using epoxy. I need to sand back an area on the rail all the way to the Blank if I use 6 4 6oz glass to build back up will the repair be visible 

thanks for the help

8 posts |
Last post
liquidfreedom's picture
Joined: 12/20/2017
Cutting, shaping, glassing in the USA

Hi all! We are looking to begin manufacturing our boards in the USA, specifically our stringerless EPS boards. Are there any suggestions on companies we should investigate to do a seriously good job? 

1 post
foamez.com's picture
Joined: 02/27/2008
FOAM E-Z Black Friday/Cyber Monday Sale!
To get the holiday season started we're cutting prices on some of our most popular products! Stop by the shop or visit our *online store to enjoy 20% select products from Friday the 24th through Monday the 27th. *No discount code necessary, discounts will be applied before checkout Sale Includes: - E-Z Square Pro V.15 - E-Z Shape Pad - E-Z Shape Pad Combos - E-Z Epoxy Kits - Foam E-Z Hats - E-Z Fred Tool - E-Z Marking Gauge - E-Z Finish Pad www.FOAMEZ.com 6455 Industry Way, Westminster, CA 92683 Telephone: 714.896.8233 Fax: 714.896.0001
17 posts |
Last post
The_Pretzel's picture
Joined: 07/19/2017
A few quick EPS foam stain questions (and one about volume)
Hey all - I'm in the process of building my second board. It's shaped similarly to a minidriver. Overall I'm super excited with how the shape is looking. I get a lot of inspiration from Almond Surfboards, so on Sunday I decided on a whim to try an epoxy foam stain using extra pigment left over from my last build. After pulling the tape I found some serious bleed through. I'm actually really stoked on the idea/pattern I came up with but the execution needs work. To be honest I kind of like that the board is a reflection of my learning curve.